Home / Axis Open / Axis Open Specification
Axis Open
Decentralizing How the World Spins.
Overview
Axis Open is a fully open-source hardware initiative focused on developing a globally reproducible turbine manufacturing and casting platform for distributed power generation. Targeting power-generation systems in the 100 kW and above range, the project aims to make turbine manufacturing faster, more economical, sustainable, and accessible through modular engineering, adaptable casting methods, locally sourceable materials, and standardized manufacturing processes.
The platform is designed to reduce dependence on centralized industrial foundries, specialized manufacturing infrastructure, proprietary equipment, and complex international supply chains. It promotes regional production by enabling independent manufacturers, technical institutions, energy cooperatives, and communities to manufacture, assemble, maintain, and improve turbine components using adaptable processes and locally available resources.
Axis Open integrates turbine engineering, rotor design, casting, metallurgy, digital manufacturing, quality assurance, and sustainable production into a unified open hardware ecosystem. Its modular architecture supports interchangeable components, scalable configurations, independent manufacturing methods, and future engineering improvements.
Core Objectives
- Develop an open and globally reproducible turbine manufacturing platform.
- Establish economical and repeatable casting processes.
- Support turbine systems in the 100 kW and above power range.
- Reduce manufacturing complexity and specialized tooling requirements.
- Enable decentralized and regional turbine production.
- Prioritize locally sourceable, recyclable, and sustainable materials.
- Develop modular components that simplify assembly, repair, and replacement.
- Standardize manufacturing specifications and quality-control procedures.
- Encourage independent engineering, testing, and continuous improvement.
- Make turbine manufacturing knowledge publicly accessible.
Core Modules
Turbine Architecture and Mechanical Engineering
Develops the foundational turbine architecture and mechanical specifications required for adaptable power-generation systems.
Features:
- Modular turbine architecture and component interfaces.
- Radial-flow turbine configurations and evaluation of alternative turbine designs.
- Aerodynamic and thermodynamic performance optimization.
- Standardized shaft, hub, bearing, and coupling interfaces.
- Turbine housing and structural component designs.
- Mechanical load and stress analysis.
- Thermal expansion and operating-condition management.
- Vibration reduction and mechanical stability.
- Scalable turbine configurations for different power-generation requirements.
- Design specifications for manufacturability, serviceability, and durability.
Modular Rotor and Blade System
Develops interchangeable rotor assemblies and blade configurations optimized for repeatable manufacturing and long-term serviceability.
Features:
- Modular rotor and blade architectures.
- Castable blade geometries.
- Standardized blade attachment interfaces.
- Replaceable blade segments where mechanically appropriate.
- Rotor hub and retention system designs.
- Aerodynamic geometry optimization.
- Structural and rotational stress analysis.
- Fatigue resistance and service-life evaluation.
- Dynamic balancing specifications.
- Rotor inspection and maintenance procedures.
- Interchangeable component specifications.
- Adaptable rotor designs for different turbine configurations.
Open Casting and Mold Manufacturing
Develops standardized casting methods that can be reproduced using different manufacturing capabilities and regional resources.
Features:
- Green-sand casting methods.
- Resin-bound sand casting methods.
- CNC-machined pattern systems.
- Digitally manufactured sand molds.
- Reusable mold and pattern designs.
- Standardized gating and riser configurations.
- Controlled metal filling and solidification procedures.
- Shrinkage compensation specifications.
- Mold preparation and reclamation procedures.
- Casting defect identification and prevention.
- Adaptable casting workflows for regional foundries.
- Manufacturing procedures designed to minimize material waste and production time.
Materials and Metallurgy
Establishes material requirements and metallurgical procedures for reliable, economical, and reproducible turbine manufacturing.
Features:
- Globally sourceable alloy specifications.
- Castable stainless steel and other validated alloy families.
- Material composition and tolerance requirements.
- Scrap-metal qualification and contamination controls.
- Melt chemistry verification.
- Heat-treatment specifications.
- Grain structure and microstructure evaluation.
- Corrosion and oxidation resistance testing.
- Tensile, impact, and fatigue testing.
- Material traceability and batch documentation.
- Recyclability and material recovery procedures.
- Regional material substitution and qualification guidelines.
Distributed Foundry and Manufacturing Systems
Develops reproducible manufacturing facilities and equipment configurations that support decentralized turbine production.
Features:
- Scalable micro-foundry configurations.
- Open furnace and melting-system designs.
- Induction melting system specifications.
- Refractory and thermal management designs.
- Mold preparation and handling equipment.
- Casting and material transport procedures.
- Heat-treatment equipment specifications.
- Standardized manufacturing workstations.
- Local energy integration.
- Equipment maintenance and calibration procedures.
- Manufacturing capacity planning.
- Regional manufacturing facility replication guides.
- Adaptable equipment configurations for different production capacities.
Digital Design and Manufacturing
Provides standardized digital engineering resources that support design adaptation, manufacturing accuracy, and global replication.
Features:
- Parametric CAD models.
- Open mechanical drawings.
- Standardized component dimensions.
- Mold and pattern design files.
- Manufacturing tolerance specifications.
- Casting simulation reference models.
- Thermal and structural simulation specifications.
- Bills of materials.
- Manufacturing process documentation.
- Revision-controlled design files.
- Digital component identification.
- Machine-readable manufacturing specifications.
- Adaptable design parameters for different turbine configurations.
Quality Assurance and Performance Testing
Establishes repeatable inspection, testing, and validation procedures for independently manufactured turbine components and assemblies.
Features:
- Casting inspection standards.
- Dimensional verification.
- Surface and internal defect inspection.
- Dye penetrant testing.
- Ultrasonic inspection.
- Material composition verification.
- Mechanical property testing.
- Rotor balancing and vibration analysis.
- Overspeed and containment validation.
- Thermal cycling and endurance testing.
- Manufacturing batch traceability.
- Operational performance evaluation.
- Published test results and failure documentation.
- Independent manufacturing validation procedures.
Turbine Integration and Power Generation
Develops the mechanical, electrical, and operational interfaces required to integrate turbine assemblies into distributed power-generation systems.
Features:
- Generator and drivetrain compatibility.
- Standardized shaft and coupling interfaces.
- Bearing and lubrication systems.
- Thermal management.
- Power conversion interfaces.
- Instrumentation and monitoring.
- Turbine control and protection interfaces.
- Operating-condition monitoring.
- Maintenance and service procedures.
- Compatibility with validated steam, combustion-gas, hydro, and other suitable energy systems.
- Microgrid and distributed generation integration.
- Adaptable power-generation configurations.
Sustainability and Material Recovery
Establishes lifecycle manufacturing practices that reduce waste, improve resource efficiency, and extend equipment service life.
Features:
- Recyclable metal component designs.
- Sand reclamation and reuse.
- Scrap segregation and recovery.
- Energy-efficient melting processes.
- Heat recovery opportunities.
- Reduced transportation requirements through regional manufacturing.
- Repair and component replacement strategies.
- Extended service-life engineering.
- Manufacturing waste tracking.
- Lifecycle material assessment.
- Sustainable sourcing guidelines.
- Closed-loop material management.
Documentation and Global Replication
Makes the complete manufacturing platform accessible to independent manufacturers, engineers, educational institutions, and community contributors.
Features:
- Open hardware construction manuals.
- Step-by-step manufacturing procedures.
- Standardized process documentation.
- Material sourcing and qualification guides.
- Regional manufacturing adaptation guides.
- Equipment construction specifications.
- Inspection and testing manuals.
- Training and educational materials.
- Documented manufacturing failures and corrective actions.
- Community manufacturing contributions.
- Translation and localization support.
- Public design revision history.
- Independent replication and validation guidelines.
Optional Plugin Modules
Advanced Casting Simulation
Extends the casting module with advanced modeling and process optimization capabilities.
Features:
- Mold filling simulation.
- Solidification and shrinkage prediction.
- Thermal gradient analysis.
- Casting defect prediction.
- Process parameter optimization.
- Comparative casting method evaluation.
- Material-specific simulation profiles.
Automated Manufacturing Controls
Adds automation and monitoring capabilities to regional manufacturing facilities.
Features:
- Furnace monitoring.
- Temperature and process control.
- Automated production records.
- Manufacturing cycle tracking.
- Equipment condition monitoring.
- Process consistency reporting.
- Production efficiency analysis.
Advanced Turbine Monitoring
Extends turbine operational monitoring and predictive maintenance capabilities.
Features:
- Predictive maintenance.
- Vibration analytics.
- Thermal performance monitoring.
- Operational efficiency tracking.
- Component lifecycle monitoring.
- Mechanical wear detection.
- Performance degradation analysis.
Alternative Manufacturing Methods
Supports additional manufacturing approaches and emerging production techniques.
Features:
- Metal additive manufacturing.
- Hybrid casting and machining.
- Advanced mold materials.
- Alternative alloy development.
- Specialized rotor manufacturing processes.
- Hybrid component fabrication.
- Comparative manufacturing performance analysis.
Distributed Manufacturing Network
Connects independent manufacturing facilities and contributors through shared production knowledge.
Features:
- Regional manufacturing directories.
- Shared design repositories.
- Production capability records.
- Manufacturing quality reporting.
- Collaborative design validation.
- Manufacturing documentation exchange.
- Replication and adaptation tracking.
Advanced Energy Integration
Extends compatibility with distributed and alternative energy-generation systems.
Features:
- Microgrid integration.
- Renewable energy system compatibility.
- Hybrid power generation.
- Waste-heat recovery.
- Energy storage system interfaces.
- Distributed power management.
- Operational efficiency optimization.
Manufacturing Standards and Validation
Axis Open prioritizes repeatability and independently verifiable manufacturing results over assumptions about performance or material suitability.
All manufacturing processes must establish documented specifications for:
- Material composition and qualification.
- Mold preparation and casting conditions.
- Metal filling and solidification.
- Heat treatment and material properties.
- Dimensional tolerances.
- Structural integrity.
- Rotor balancing.
- Rotational stress and fatigue resistance.
- Thermal operating limits.
- Component inspection and acceptance criteria.
Manufacturing parameters must be validated for each applicable alloy, component geometry, and casting method. Material substitutions and regional manufacturing adaptations must undergo appropriate qualification before being incorporated into validated production specifications.
Turbine assemblies must undergo staged testing, including structural verification, containment validation, controlled rotational testing, and operational performance evaluation before deployment.
Development Roadmap
Initial Development
- Establish the reference turbine architecture.
- Develop modular rotor and blade designs.
- Define material and casting requirements.
- Create initial parametric CAD models.
- Establish manufacturing and testing specifications.
- Identify accessible manufacturing equipment requirements.
Prototype Development
- Produce casting and mold prototypes.
- Validate alloy composition and mechanical properties.
- Evaluate casting repeatability.
- Conduct dimensional and structural testing.
- Validate rotor balancing procedures.
- Document manufacturing performance and design revisions.
Manufacturing Validation
- Establish a reproducible regional foundry configuration.
- Validate manufacturing procedures across independent facilities.
- Evaluate production costs and energy consumption.
- Assess material recovery and waste reduction.
- Conduct turbine assembly and performance testing.
- Publish independently verifiable test results.
Global Replication
- Release complete manufacturing documentation.
- Encourage technical institutions and independent manufacturers to reproduce the platform.
- Establish a shared repository of validated improvements.
- Expand compatible turbine configurations and power classes.
- Develop regional manufacturing partnerships.
- Encourage collaborative engineering and independent performance verification.
Design Principles
- Open by Design: Core hardware designs, manufacturing specifications, and technical documentation remain publicly accessible.
- Reproducible Everywhere: Manufacturing methods prioritize adaptability across different regions and levels of industrial capability.
- Economical Manufacturing: Reduce specialized tooling, unnecessary complexity, material waste, and production costs.
- Balanced Performance: Optimize efficiency, durability, manufacturability, and operating reliability together.
- Modular Engineering: Standardized interfaces and replaceable components simplify manufacturing, maintenance, and future development.
- Material Sustainability: Prioritize recyclable materials, responsible sourcing, and closed-loop manufacturing.
- Independent Verification: Publish testing procedures, validated performance data, and manufacturing results.
- Community Development: Encourage independent manufacturing, experimentation, adaptation, and shared improvements.
- Long-Term Serviceability: Design components for inspection, repair, replacement, and extended operational life.
Project Vision
Axis Open aims to make advanced turbine manufacturing more accessible by transforming casting and mechanical engineering into a shared, reproducible global resource.
By combining modular hardware, accessible manufacturing methods, sustainable materials, and open engineering knowledge, the project seeks to reduce dependence on centralized production and enable more regions to manufacture, maintain, and improve the equipment that generates their power.
The long-term objective is to establish a scalable manufacturing ecosystem where turbine designs can be independently reproduced, locally adapted, tested, and improved without dependence on proprietary manufacturing systems or geographically concentrated supply chains.
Specification Branding License (SBL)
Standard
- Fully AGPL-3.0+ compliant system
- Copyleft enforced for network deployments
- Required attribution:
- Roxanne Ardary
- https://www.roxanneardary.com/
Optional
- Specification Branding License (SBL)
- Attribution-free commercial deployment
- Pricing based on scale, usage, and deployment scope
- https://roxanneardary.com/axis-open/
License & Notice Requirements
Axis Open is released under the GNU Affero General Public License v3.0 or later (AGPL-3.0+).
By contributing to any Open Arsenal project, you agree that your contributions will also be released under this license.
Please note the following:
- All contributions must comply with the AGPL-3.0+ terms.
- Under Section 7 of the license, all redistributions, forks, and derivative works must preserve attribution to: Roxanne Ardary and roxanneardary.com.
- Axis Open specifications are free to use with attribution. A Specification Branding License can be negotiated upon request.
- The project’s notice.md file tracks attribution requirements and contributor acknowledgments. Any update that adds new contributors or modifies attribution should also update
notice.md. - When submitting a pull request, ensure that any new files maintain the attribution headers where applicable.
- Network-deployed versions of this software must also remain fully AGPL-3.0+ compliant, including exposure of source code modifications when applicable under the license.
For full legal details, please refer to the AGPL-3.0+ license and the project’s notice.md file.
Notice – Axis Open
Attribution Requirement: Under Section 7 of the AGPL 3.0+ license, all redistributions, forks, and derivative works, including network-deployed versions of this project, must provide attribution to Roxanne Ardary and roxanneardary.com.
Contributors
This file tracks contributors and their specific contributions to the project.
- Roxanne Ardary, roxanneardary.com – November 17, 2026
Created the repository for Axis Open. Established the project concept and initial specifications for an open-source, modular turbine manufacturing and casting platform focused on sustainable materials, decentralized production, and globally reproducible power-generation technology. - [Add other contributors here] – [Date]
[Describe contribution in one sentence]
License – Axis Open
This repository is licensed under the GNU Affero General Public License v3.0 or later (AGPL-3.0+).
Key Points:
- You are free to use, modify, and distribute the code.
- All redistributions, forks, and derivative works or network-deployed versions must also be licensed under AGPL-3.0+ and provide attribution to Roxanne Ardary and roxanneardary.com as required under Section 7 of the license.
- The software is provided “as is,” without warranty of any kind.
For the full license text, see GNU AGPL-3.0 License.



